RTV-4110 Platinum-Cure Silicone Rubber – 210 oz Combo Deal | Shore 10A | 1:1 Mix | 3 Complete Kits

BUY MORE & SAVE — 210 oz Combo Deal!

Create professional-quality silicone molds with RTV-4110 platinum-cure silicone rubber, a soft, flexible, low-viscosity material designed for excellent detail reproduction and easy demolding.

This bulk combo deal includes three complete 70 oz silicone kits, providing six factory-sealed bottles of professional mold-making silicone at an exceptional value.

With a Shore A hardness of 10, a simple 1:1 mixing ratio by weight, and an approximate 4-hour room-temperature cure, RTV-4110 is an excellent choice for mold makers, chocolatiers, bakers, soap makers, and creative professionals.

Its translucent appearance, excellent flow, and low shrinkage make it particularly suitable for detailed molds and delicate castings.

Key Features & Benefits

• 210 oz Combo Deal – Bulk Savings: Receive three complete silicone kits, ideal for larger projects, repeat production, and professional mold makers.

• Shore 10A – Soft & Flexible: Produces flexible molds that make releasing intricate or delicate castings easier.

• Easy 1:1 Mixing: Simply combine equal weights of Part A and Part B.

• 35-Minute Working Time: Provides time to mix, degas, and pour before curing begins.

• Approximately 4-Hour Cure: Cures at room temperature under recommended conditions.

• Exceptional Detail Reproduction: Captures fine textures, intricate shapes, and surface details.

• Low Shrinkage (≤0.1%): Helps preserve the dimensions and details of your original master.

• High Heat Resistance: Manufacturer-rated up to 482°F (250°C) for cured silicone.

• Translucent & Customizable: Compatible silicone pigments can be used to create custom colors.

• Food-Contact Testing Documentation: Manufacturer-provided SGS testing reports passing results for FDA 21 CFR §177.2600 total extractives on a referenced silicone sample.

Recommended Applications

RTV-4110 is designed for producing soft, flexible molds used in:

• Chocolate, candy, and confectionery making

• Cakes, mousse desserts, and decorative food molds

• Soap and candle making

• Resin and compatible craft casting applications

• Intricate decorative models and detailed castings

• Larger mold-making projects and repeat production runs

Its low hardness makes RTV-4110 particularly well suited to simple, one-piece molds and designs requiring easy demolding.

Technical Specifications

Specifications are manufacturer-reported typical values. Actual results may vary depending on processing and curing conditions.

Simple Mixing & Pouring Instructions

Step 1 – Prepare Your Master

Ensure the master model, tools, and mold box are clean, dry, and free of contaminants that could interfere with curing.

Step 2 – Measure Equal Parts

Using a digital scale, measure equal weights of Part A and Part B (1:1 by weight).

Step 3 – Mix Thoroughly

Combine both components and mix carefully, scraping the sides and bottom of the container.

Step 4 – Remove Air Bubbles

Vacuum degassing is recommended when needed to minimize trapped air and improve mold quality.

Step 5 – Pour

Slowly pour the silicone into the lowest point of the mold box, allowing it to flow naturally around the master.

Step 6 – Allow to Cure

Allow approximately 4 hours at room temperature (77°F / 25°C) before demolding.

Important Processing Information

Platinum-cure silicone is sensitive to certain contaminants that may interfere with curing.

Potential cure inhibitors include sulfur-containing materials, tin-cure silicone, amines, and some epoxy or UV resin materials.

For best results, use clean equipment, follow the recommended processing conditions, and perform a small compatibility test when working with unfamiliar materials.

Food-Contact Testing & Compliance Documentation

Minghuilink's SGS Test Report NGBHL25007444301, dated November 17, 2025, documents passing results for total-extractives testing under U.S. FDA 21 CFR §177.2600.

The tested sample is identified as model 4140, and RTV-4110 appears in the manufacturer's reference model list. The report does not establish that RTV-4110 was independently tested.

Food-contact suitability for the finished mold depends on the formulation, correct mixing, complete curing, and intended conditions of use.

Note: FDA compliance testing does not constitute FDA approval or certification of an individual product.

What's Included – 210 oz Combo Deal

This combo includes three complete two-part silicone kits, for a total of six factory-sealed bottles:

• Part A: Three factory-sealed 1 KG (35.27 oz) bottles

• Part B: Three factory-sealed 1 KG (35.27 oz) bottles

• Total Combo Weight: 6 KG (13.23 lb)

• Total Silicone: Approximately 211.64 oz, marketed as a 210 oz combo

• Mixing Ratio: 1:1 by weight

Each bottle is factory-filled and sealed by the manufacturer. The combo provides enough Part A and Part B for three complete mixing sets.

Storage & Shelf Life

Store tightly sealed in a cool, dry location, ideally between 60–77°F (15–25°C), away from direct sunlight and incompatible materials.

Manufacturer-stated shelf life is 24 months from the date of manufacture when stored correctly.

The Silicone Chef

Professional Silicone Molds & Mold-Making Materials

Distributed by The Silicone Chef | https://thesiliconechef.org